Need HElp Identifying some compnents

Discussion in 'The Projects Forum' started by killadaninja, Jun 30, 2008.

  1. killadaninja

    Thread Starter New Member

    Jun 30, 2008
    3
    0
    I i was wondering if anyone could help me find these parts and where to get them im live in london cheers
     
  2. killadaninja

    Thread Starter New Member

    Jun 30, 2008
    3
    0
    ive ordered so many components ans every time they are the rong 1z
     
  3. beenthere

    Retired Moderator

    Apr 20, 2004
    15,815
    282
    1. Bridge rectifier. Not sure of rating (volts & amps).

    2. 1500 ohm resistor

    3. .82 microfarad 250 volt capacitor. Might be poly film type.
     
  4. hgmjr

    Moderator

    Jan 28, 2005
    9,030
    214
    The bridge rectifier turns out to be rated for 0.8 Amps at 600VDC.

    hgmjr
     
  5. killadaninja

    Thread Starter New Member

    Jun 30, 2008
    3
    0
    thanks guys thats what i thought but i cant find a bridge rectifier like this one would the normal hd06 do it? and why when i get 1500 ohm resistors thr massiv but tha original was tiny
     
  6. Audioguru

    New Member

    Dec 20, 2007
    9,411
    896
    I can buy 1/10th W resistors that are tiny, 1/8th W ones that are a little bigger. 1/4W ones that are also a little bigger but are still very small, 1/2W ones that are bigger, 1W and 2W ones that are big and many huge ones.
     
  7. DC_Kid

    Distinguished Member

    Feb 25, 2008
    638
    9
    bridge rectifier, resistor, cap

    radioshack
     
  8. hgmjr

    Moderator

    Jan 28, 2005
    9,030
    214
    The bridge rectifier is a gull-wing surface-mount component. Is it possible that the design used a mix of through-hole and surface-mount components. If so, then the tiny resistor may have been a surface-mount resistor.

    hgmjr
     
Loading...