The clock about 43 years old by now. I discovered MOSTEK MK-5017 and three Beckman Panaplex displays are working condition. I decided to overhaul the clock because former builder was not doing good job i.e. soldering, cut wires and several other items.
Anyway, I need you to see picture and who make this kind of pin connector that Heath Company used to make a good interface with panaplex displays into the PCB. I already checked Molex and Augat but so far, I have not able to find it and what is part number. I checked eBay and many different vendors for new pin connectors but nothing.
Please review pictures here and hope that you may have good information would be very helpful.
Anyway, I need you to see picture and who make this kind of pin connector that Heath Company used to make a good interface with panaplex displays into the PCB. I already checked Molex and Augat but so far, I have not able to find it and what is part number. I checked eBay and many different vendors for new pin connectors but nothing.
Please review pictures here and hope that you may have good information would be very helpful.
