Nand command standardization

Discussion in 'Embedded Systems and Microcontrollers' started by abhijitnaik27, Aug 10, 2011.

  1. abhijitnaik27

    Thread Starter New Member

    Aug 9, 2011
    1
    0
    Hello Guys,
    We are designing the generic driver for Nand. We have seen that the large page Nand have same command set, bad block status location and read Id format. My question is whether there exists any standard for these parameters?

    I have seen ONFI standards, but none of the data sheets mention that they conform to ONFI standard but still the above mentioned features are common.

    Thanking you,
    Abhijit:)

    I hope the crisis in London solves soon
     
Loading...