MOSFET Design

Thread Starter

MarsG

Joined Sep 12, 2015
24
I am required for my homework to design a mosfet with a drain current of 6mA and a 20V source voltage, I am first to design it by hand and calculate all the currents and voltages, than compare them to the pspice simulation. I did the by hand calculations but my by hand numbers do not match with the pspice sim. I posted below all my work and the pspice sim.

Would be thankful if someone could help me figure out where I went wrong.
 

Attachments

Jony130

Joined Feb 17, 2009
5,487
Why you replace (1+lamda*Vds) with (1+lambda*(Vgs - Vt)) ??
Also Id = 6mA if Vds = 20V and Vgs = 2.85164V. For Vds = 10V you need to change Vgs to Vgs = 3V. As for the simulation, have you change the mos model ??
 

Attachments

Last edited:
Top