Modifying Servo board for higher voltage/current NEED expert electronics advice!

Thread Starter

RCpaul

Joined Oct 26, 2012
16
NFA Fabrication,

Tried testing your setup today and had no luck.

I connected:

the positive side of a 11v battery to pins 87 on both relays,

the negative side of that same 11v battery to pins 86 and 87a on both relays,

my motor to pins 30 on both relays,

and I tired to apply voltage from another 8v battery to pins 85 on both relays.

I could hear the relays click but my motor did not turn and when I hooked up my volt meter to pins 30 I did not read any voltage.

Any suggestions?

Thanks
Paul

 
Top