mixer looks like like xmas tree

Discussion in 'General Electronics Chat' started by Mark Curle, Jul 2, 2015.

  1. Mark Curle

    Thread Starter New Member

    Jul 2, 2015
    2
    0
    please could some one help with my yorkville mixer it has all clipping leds lit up on each channel (12) and the main left and right vu meter leds are the same at start up and stay that way until turned off i read some were it could be a power regulator or something to that effect im guessing power but im no expert i hope im in the right place to ask this please feel free to send me to the right forum,kind regards mark.
     
  2. Randy 7140

    Member

    Jun 17, 2015
    32
    6
    Is it all of the LED's lighting up? Or just the clip LED's? Does anything change when any cables are connected or disconnected? I have seen bad capacitors cause this on a single channel, but not multiples. The commonality here is power, so I would check the caps on the power supply board. Good luck.
     
  3. AnalogKid

    Distinguished Member

    Aug 1, 2013
    4,542
    1,251
    No manufacturer, no model number, no photos, no link to online information... No clues = no answer.

    ak
     
  4. ian field

    Distinguished Member

    Oct 27, 2012
    4,415
    784
    Its broken.
     
Loading...