merging eagle pcb layout

Discussion in 'Embedded Systems and Microcontrollers' started by eeeelectx, Dec 30, 2010.

  1. eeeelectx

    Thread Starter New Member

    Dec 29, 2010
    3
    0
    I have made the pcb layout of my project in two part using eagle (Easily Applicable Graphical Layout Editor) for the sake of easyness to edit.and it is working good.
    Now I want two merge them in one layout. How can i merge them .Please help me out.
     
  2. jpanhalt

    AAC Fanatic!

    Jan 18, 2008
    5,699
    907
    I have never done that, but assuming you have them linked to a schematic, you would do the merging on the schematic. Highlight, cut, then paste the schematic onto the other schematic. I think you will have to redo the board for the pasted schematic.

    If the boards not linked to schematics, highlight and cut one board (A). Then paste board A to a new board. Highlight and cut the second board (B). Then paste that to the same new board as you did for A. I have done multiple copies of the same board that way. I think it will work for different boards as well.

    John
     
Loading...