Making plastic enclosures for electronics - low cost do-it-yourself

Discussion in 'The Projects Forum' started by StephenDJ, Feb 12, 2009.

  1. StephenDJ

    Thread Starter Active Member

    May 31, 2008
    58
    0
    I've been searching for a way to make game cartridge cases for electonics, or any other device I build. I know I sure can't afford the cost of injection molds, so nevertheless what I've found are these great links:


    http://www.caswellplating.com/aids/alumilite.html
    http://www.fxsupply.com/mold_cast/mold_cast.html
    http://www.tapplastics.com/shop/product.php?pid=75&
    http://www.shapelock.com/page2.html

    It seems to me that the polyurethane resin or clear casting resin would be the closest similitude to ABS plastic and could be used for these purposes, right?.
     
    Last edited: Feb 12, 2009
Loading...