Lm741/747

Discussion in 'The Projects Forum' started by Seehat, Nov 5, 2013.

Thread Status:
Not open for further replies.
  1. Seehat

    Seehat Thread Starter New Member

    Joined:
    Oct 14, 2013
    Messages:
    12
    Hi all
    I just need some help on my project.
    what it will take to make a circuit that indicates by turning an led on. when a particular Ac signal is applied. For eg. 2 + A(Sin(2pi*f*t) where 1<=A<=4 and 20hz <= f <= 20k Hz.

    and also switch on another led when the frequency is between 970Hz to 1.03khz.

    i only know that a narrow band pass filter will be required to pass the desired frequency.
  2. MikeML

    MikeML Well-Known Member

    Joined:
    Oct 2, 2009
    Messages:
    1,609
    Location:
    AZ27
  3. bertus

    bertus Administrator Staff Member

    Joined:
    Apr 5, 2008
    Messages:
    12,338
    Location:
    Amsterdam,Holland (GMT + 1)
    Hello,

    As stated by MikeML, stick with one thread for one subject.

    Bertus
Thread Status:
Not open for further replies.

Share This Page