ISD 2560 confuse T_T

Discussion in 'General Electronics Chat' started by drinkz, Oct 26, 2008.

  1. drinkz

    Thread Starter New Member

    Oct 26, 2008
    hi there,
    does anyone know how to use IDS 2560 chipcorder?
    i have looked in the datasheet for the connections,etc.
    pin 7 and 8 are connected to a microphone, so recording a music can be done by exposing the microphone to a music...
    my question is, is it possible to connect pin 7 and 8 to computer's speaker (replacing the microphone)?
    so i will play the music on my computer to store and into the chip through the speaker connections...

    sorry for bad english,
    need help :(:(
  2. hgmjr


    Jan 28, 2005
    Based on the attached excerpt from the datasheet for the ISD-2560, the microcontroller/microprocessor can download a canned digital message into the device via the address/memory interface. This is in addition to the analog recorder mode.