IR controlled DC motors using arduino uno

Discussion in 'Embedded Systems and Microcontrollers' started by Akash Kundu, Nov 14, 2015.

does anyone have other ways to perform this controlling technique?it cab be anything.

  1. yes

    0 vote(s)
    0.0%
  2. no

    0 vote(s)
    0.0%
Multiple votes are allowed.
  1. Akash Kundu

    Thread Starter New Member

    Nov 14, 2015
    1
    0

    infrared signal is used as the "trigger" for the operation of dc motors(or any other appropriate devices eg:LEDs).
    i have used the arduino uno as the microcontroller as it simply does the job!also it's cheap too!!
    future application will ultimately lead to IR controlled robot,and perhaps controlling of human mind using nothing but a simple remote control and interfacing hardware with electrodes,so that the physically disabled can attain normal "motor" functions.thanks.
     
  2. Wendy

    Moderator

    Mar 24, 2008
    20,765
    2,536
    Please read the rules of the Completed Projects forum.

    This project does not meet the above requirements. If you want to resubmit this entry please rework the entry to meet the requirements, then drop one of the moderators a PM pointing to it. If it is acceptable a moderator can move it back to the Completed Projects forum and clean up notices and suggestions (making them invisible).

    All documents must be hosted locally. AAC allows for attachments and albums, use them. You Tube video links allowed, but they in no way constitute proper documentation.
     
    Last edited: Nov 14, 2015
    Akash Kundu likes this.
Loading...