Looking for a control circuit for an inverter I purchased with an odd range built in to it.
It was meant to be a 12V inverter, but its range is 14 - 28V. So a 12V car battery will not supply enough to turn it on and two 12V batteries in series(24V) will turn it on, but it will not turn off until the dischanges drops below 14V.
I'd like to keep it in the range of (hopefully) 22 - 26.5V.
I was hoping to include two knobs(POTS) to control the cut-in cut-out voltages.
Hope someone can help....Thanks in advance.
It was meant to be a 12V inverter, but its range is 14 - 28V. So a 12V car battery will not supply enough to turn it on and two 12V batteries in series(24V) will turn it on, but it will not turn off until the dischanges drops below 14V.
I'd like to keep it in the range of (hopefully) 22 - 26.5V.
I was hoping to include two knobs(POTS) to control the cut-in cut-out voltages.
Hope someone can help....Thanks in advance.
