All About Circuits

interfacing this calculator lcd.

beenthere

beenthere

Joined Apr 20, 2004
15,819
Yes, if you know the function of each pin in the connector and you have a mating connector to use with whatever device you want to drive it with. The calculator display is purpose-built, and probably has no information available.

Probably better off getting a graphics display with a spec sheet.
 
You must log in or register to reply here.
Thread starter Similar threads Forum Replies Date
K Interfacing resistors pack with RTC General Electronics Chat 3
M Interfacing single master with multi slave Microcontrollers 7
M Role of Pull-Up/ Pull-Down Resistors in Microcontroller Interfacing Microcontrollers 9
Bod DVI interfacing with TFP401x Digital Design 0
BrokenPin what best bus transceiver to translation from a 3.3V to a 5V/3.3V environment ? General Electronics Chat 3
Similar threads
Interfacing resistors pack with RTC
Interfacing single master with multi slave
Role of Pull-Up/ Pull-Down Resistors in Microcontroller Interfacing
DVI interfacing with TFP401x
what best bus transceiver to translation from a 3.3V to a 5V/3.3V environment ?

You May Also Like

Top