hyper terminal

Discussion in 'Programmer's Corner' started by betoelbarato, Nov 29, 2007.

Thread Status:
Not open for further replies.
  1. betoelbarato

    Thread Starter New Member

    Nov 29, 2007
    3
    0
    hello my name is beto

    I would like to know if someone is familiar with the hyper terminal program located in the windows start- programs-accesories-communications-hyper terminal

    because I want to be able to send a signal from my computer to the rs232 port for example a letter a or b or c to a microcontrller

    the idea is to send the ascii code from the computer to the microcontroller pic16f877a and then the pic is going to reconginse it and then its going to drive some motors

    and I heard that this is the easiest way to do it, with the hyper terminal program so please if someone knows how to do this or knows how to send a signal from the computer via rs232 please tell me

    thanks
     
  2. nanovate

    Distinguished Member

    May 7, 2007
    665
    1
  3. Dave

    Retired Moderator

    Nov 17, 2003
    6,960
    145
Loading...
Thread Status:
Not open for further replies.