I have to solder in a 3.58MHz Crystal Resonator that has an internal cap. I have 2 spots on the circuit board and 6 spots on the crystal resonator. Which of the 6 spots do I solder to the 2 connections?

Arranged like this on the bottom of the crystal. I am thinking that I would just solder the last 2 on each end.

[: : :]

It is a PX358SCT-ND from DigiKey

 

Here's the datasheet for your resonator:
http://www.panasonic.com/industrial/components/pdf/apa0000ce10.pdf
See type "S".
Looks like the two center terminals get connected to ground, and the ends are opposite sides of the crystal.