Sorry guys, here's the attachment.
I'm thinking of building this circuit but am curious as to how the Capacitor values are determined by the circuit designer. I am especially curios as to the method that is used to determine these values;
Cap between PIN 3 on first IC to PIN 2 on the second IC
Cap connected from PIN 5 on each IC to GROUND
Cap between the 2K resistor and the 100K resistor.
Once again, thanks a lot for your time and help. JDR04
I'm thinking of building this circuit but am curious as to how the Capacitor values are determined by the circuit designer. I am especially curios as to the method that is used to determine these values;
Cap between PIN 3 on first IC to PIN 2 on the second IC
Cap connected from PIN 5 on each IC to GROUND
Cap between the 2K resistor and the 100K resistor.
Once again, thanks a lot for your time and help. JDR04
Attachments
-
200.1 KB Views: 24
Last edited: