Help with RF Generator Repair

Thread Starter

RadioFrequency

Joined Dec 16, 2013
1
Hello - thanks in advance to everyone for their help and guidance. I have several SEBRA RF Generators that are used in conjunction with a sealing head to seal off PVC tubing in medical device assembly. The generators are starting to fail (transformers, resistors and 10 turn dials primarily), and I am hoping to get some help locating a repair facility? The manufacturer is now VANTE, and will not help with repair or referrals. Any help, comments or direction is appreciated!
 

Dr.killjoy

Joined Apr 28, 2013
1,196
Hello - thanks in advance to everyone for their help and guidance. I have several SEBRA RF Generators that are used in conjunction with a sealing head to seal off PVC tubing in medical device assembly. The generators are starting to fail (transformers, resistors and 10 turn dials primarily), and I am hoping to get some help locating a repair facility? The manufacturer is now VANTE, and will not help with repair or referrals. Any help, comments or direction is appreciated!
Not sure where you got the info but Haemonetics bought SEBRA out ....

http://en.wikipedia.org/wiki/Haemonetics
 
Top