Help with motor connections

Discussion in 'General Electronics Chat' started by Julian1, Jun 7, 2013.

  1. Julian1

    Thread Starter New Member

    May 15, 2013
    1
    0
    Hi,

    I have a new drive motor for my electric recharge mower, but I am having problems with the electrical connections. My old motor just had the two connections, and the speed controller is separate, but the new motor looks like it has the speed controller built into it. I am not sure how to connect it up, as I don't know what the various wires do.

    There are 5 very thin wires coloured; yellow, black, blue, green and red, and 3 thicker wires coloured; yellow, green and blue.

    Does anyone know what the various wires do or any tests I could perform myself to find out? I was hoping these wires are a standard colour coding. The motor is 36v DC, and about 900w.

    Thanks
     
  2. sheldons

    Active Member

    Oct 26, 2011
    616
    101
    can you post a pic of your new motor and the old one as a comparison?
     
Loading...