Help with connector identification

Discussion in 'General Electronics Chat' started by mlaymance, Nov 26, 2008.

  1. mlaymance

    Thread Starter New Member

    Nov 22, 2008
    7
    0
    Guys,

    I am trying to Identify a couple of connectors for a project I am working on. These are board mounted connectors.

    I have looked on the Newark and Mouser website for some help dentifying them, but not having much luck.

    I uploaded the photos of these connectors to photobucket.

    Can someone help me Identify them?
    Here is the link to the Images.

    http://s535.photobucket.com/albums/ee353/mlaymance/20-1000/
    Thanks in advance for your help.
     
  2. k7elp60

    Senior Member

    Nov 4, 2008
    478
    69
    They appear to be normal pin spacing of 0.1" or 2.54mm. I looked in my Digikey catalogue and could only find double row similar. Do you need to duplicate the ones shown in the photos or do you need some mating connectors.
    Also measuring the pin spacing and the pin diameter might help finding what you are looking for.
     
  3. scubasteve_911

    Senior Member

    Dec 27, 2007
    1,202
    1
  4. mlaymance

    Thread Starter New Member

    Nov 22, 2008
    7
    0
    I am not sure what you mean by measuring the pitch. I know how to measure pin dia. and Pin spacing, but not sure about pitch.

    Thanks,
    Michael
     
  5. beenthere

    Retired Moderator

    Apr 20, 2004
    15,815
    282
    Pin spacing is the pitch.
     
Loading...