Help in checking my circuit

Discussion in 'Homework Help' started by No22Ben, Oct 3, 2010.

  1. No22Ben

    Thread Starter New Member

    Oct 3, 2010
    1
    0
    The 1st picture is the assignment question that lecturer gave me, 2nd picture is my schematic voltage regulator circuit, and 3rd picture is the schematic of my multiplier circuit ...And, the last picture is my circuit, did i built it in a correct way ??? Can anyone check for me ??? Really appreciate ~~~

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    *** The left part is my voltage doubler part, and the right part is my voltage regulator . I guess I haven't connect another wyre to connect the regulator ground to multiplier ground ><
     
  2. n1ist

    Active Member

    Mar 8, 2009
    171
    16
    In the assignment, the multiplier is supposed to run on the regulated 5V, not the unregulated input. Your wired version correctly shows this. I would also place the 100nf cap close to the regulator. Otherwise, the circuit looks OK to me.
    /mike
     
Loading...