help in atmega 16 microcontroller

Discussion in 'Embedded Systems and Microcontrollers' started by moslem, Dec 16, 2009.

  1. moslem

    Thread Starter New Member

    Dec 16, 2009
    20
    0
    hi every one;
    please iwant to know how to program the ADC in the controller such that the sampling rate is 8Khz iknow that the lowest freq in the controller is 1Mhz so ihave to use external crestal oscillator ,now i want to know how to connect the crestal to the controller to work well
    thanks
     
  2. hgmjr

    Moderator

    Jan 28, 2005
    9,030
    214
    You may find the information on www.avrbeginners.net.

    There is a section on setting up the ADC port.

    hgmjr
     
  3. moslem

    Thread Starter New Member

    Dec 16, 2009
    20
    0
    thanks alot
     
Loading...