Hi, Sorry if this is in the wrong forum. I have recently been given this electric motor off a saw bench, I did not receive any switch gear with it, what you see in the picture is exactly how I got it.I have been trying to work out how to connect it to a 240v 13A supply with a basic on / off switch as in the picture. The trouble I am having is working out which wire is which, Live and Neutral and what the 2 other wires are for. Any help would be greatly appreciated, I have attached photos, and I have NOT changed any wires, this is how I received it.

Thanks Jay

 

The white wires might have labels on them. Can you look? The labels might be numbers (T1, T2, T3 for example) or it could be letters (U, V, W for example).

Do you have a cover/lid for that electrical box? Often they have a schematic for the connection on the inside of the cover/lid.

 

Manual attached.

Page 2.20 of the manual, Single Phase connection.

 

Thanks so much for your help. i had looked around for the schematics but could not find any, so this is great. Thanks once again Jay