h-bridge driver ic

Discussion in 'General Electronics Chat' started by adn07, Oct 23, 2008.

  1. adn07

    Thread Starter Member

    Sep 25, 2007
    17
    0
    im using h-bridge to control the dc motor motion (forwared and revers)
    i wont an h-bridge driver ,that accept the input from microcontroller like ADP3417 , the problem is i dont know another ic h-driver except the previous one,so what are the other types of such and ic h-bridge drivers that accept either high or low (ov ,1v) from microcontroller pic, for 15 v.and thanx alot for your time.
     
  2. thingmaker3

    Retired Moderator

    May 16, 2005
    5,072
    6
    The short answer is "yes." The long answer is "Vishay, Intersil, and other folk make lots of half-bridge and/or full bridge driver circuits."

    What are the logic o/p signals from your pic? Is 15V the Vcc you have available for the gates of the MOSFETs, or is 15V the supply for the motor?
     
Loading...