Flyback transformer - need help

Discussion in 'The Projects Forum' started by diaboliqu69, May 5, 2010.

Thread Status:
Not open for further replies.
  1. diaboliqu69

    Thread Starter New Member

    Apr 27, 2010
    1
    0
    I`ve got a flyback transformer from an very old TV and Also 2x 2N3055 transistors and tried to identify the wires to

    make a driver for it after http://lifters.online.fr/lifters/labhvps/tht.htm tutorial and I did not at all. I don`t

    know why but i can`t identify the wires...maybe I have messed something, please look at the pictures and help me

    measurements:

    pins numbers value

    1 WITH 2 12 OHM

    1 WITH 3-4 24 OHM

    1 WITH 5 35 OHM

    1 WITH 6 43 OHM

    7 WITH 8 4 OHM

    2 with green wire 300 OHM

    each coil in other side 2,5 OHM

    There were 2 cable that look like HV output : pin nr. 1 http://uploadrobot.com/?v=p1170831.jpg
    The second one was in the other end were are 2 coils with 2,5 OHM impedance http://uploadrobot.com/?v=p1170830.jpg





    http://uploadrobot.com/?v=p1170830.jpg
    http://uploadrobot.com/?v=p1170831.jpg
    http://uploadrobot.com/?v=p1170832.jpg
    http://uploadrobot.com/?v=p1170833.jpg
    http://uploadrobot.com/?v=p1170835.jpg
    http://uploadrobot.com/?v=p1170836.jpg
    http://uploadrobot.com/?v=p1170841.jpg
    http://uploadrobot.com/?v=p1170842.jpg
     
  2. bertus

    Administrator

    Apr 5, 2008
    15,646
    2,345
Loading...
Thread Status:
Not open for further replies.