Fluke 743b issue w/ continuity - shows SHORT when open

Discussion in 'General Electronics Chat' started by mick96, Jan 19, 2015.

  1. mick96

    Thread Starter New Member

    Jan 19, 2015
    2
    0
    I have a FLUKE 743B Documenting Process Calibrator which shows that there is continuity (short) with the leads attached (open) and without leads. I noticed this issue when I selected the audio feature for continuity on the Fluke 743B and the meter began to generate the audible continuity tone when no leads were attached.
    Any ideas on what might cause this issue?
    Thanks
     
  2. Alec_t

    AAC Fanatic!

    Sep 17, 2013
    5,813
    1,105
    What does the manual say?
     
  3. mick96

    Thread Starter New Member

    Jan 19, 2015
    2
    0
    operators manual doesn't cover this issue and I don't have access to the Fluke 741B, 743B. 744 service manual
     
Loading...