Flasher Circuit for 3m long strip of 3528 LEDs, quad row

Discussion in 'The Projects Forum' started by jkam6033, Jul 21, 2015.

  1. jkam6033

    Thread Starter New Member

    Jul 21, 2015
    1
    0
    Hello, first post here, pseudo circuit newbie

    I'm hoping to make a circuit to flash a 3 meter strip of quad-row 3528 LEDs (pictured below). There are 450 LEDs/m. Is this feasible/reasonable?

    I've included the specs beneath the picture.

    Thanks in advance!

    [​IMG]
    Beam Angle 180 degree
    Connection Type Solder Pads
    Dimmable Yes
    IP Rating Non-Weatherproof
    LED Lifetime 40000 Hours
    Number of LEDs in Unit 432 LEDs
    LED Type 3528 SMD
    LEDs per Segment 24
    Length (in) 41.89in (3.49ft)
    Lumen 2788 Lumen
    Polarity Sensitive No
    Price Per Foot 14.01
    Standards And Certifications ROHS Compliant
    Strip Width 28mm (1.10in.)
    Suitable for Vehicles No
    Type Flexible Light Strips
    Operating Voltage Range 24 VDC
     
  2. Bernard

    AAC Fanatic!

    Aug 7, 2008
    4,170
    395
    Not so pure guessing: 24 V @ 5 A supply. A 555 with FET driver.
     
  3. ScottWang

    Moderator

    Aug 23, 2012
    4,850
    767
    How is the current of led?
    What are you trying to do, just power up the leds?
     
Loading...