Envelope Detector using zero bias schottky diode

Discussion in 'Wireless & RF Design' started by ashiqrahman, May 5, 2016.

  1. ashiqrahman

    Thread Starter New Member

    May 5, 2016
    Hello all,
    I want to design a Envelope detector using zero bias schottky diode to demodulate carrier frequency 868Mhz or 433Mhz to 125Khz base band signal. I am using HSMS-2850 schottky diode. To my design i dont know what value I should give to capacitor and resistor. It will be great if someone share their knowledge regarding my thread.