So this is strange, my dash lights went out I think faulty switch. So I put LED strips inside my cluster and ran it to the stereo. I hooked it to the stereo ignition wire and ground and then something went wrong. The fuse blew in the ACC#11 block and the stereo went out BUT! The LEDs were still on.
Discounected the lights and replaced the fused and it blue again so I uped it to a 15AMP. Now I think its surging because it resets the stereo.

Everything looks fine to me, I dont know why this is hapening and cant seem to fix it.
One other thing, my LED lights flicker when I step on the brake. I'm thinking I can add a capacitor to make them stop flickering? Any one know why?
Any help is greatly appreciated.

 

Well, I would start by...
Oh, never mind, here comes the padlock!

 

Hello,

I am closing this thread as it violates AAC policy and/or safety issues.

Quote:
6. Restricted topics.

The following topics are regularly raised however are considered “off-topic” at all times and will results in Your thread being closed without question:

• Any kind of over-unity devices and systems
• Automotive modifications
• Devices designed to electrocute or shock another person
• LEDs to mains
• Phone jammers
• Rail guns and high-energy projectile devices
• Transformer-less power supplies

This comes from our Tos:
Terms of Service
There will be enough sites where automotive questions can be discussed :
Member selected automotive forums

Bertus