I would like to make an electric fence energiser. I am aware of all the laws pertaining to the electric fences in Zimbabwe.
If my understanding is correct a energiser consists of an oscillator which induces a high voltage, with very little current in an HT transformer. This is then pulsed down the fence.
The system is a closed loop which if cut activates an alarm, or if shorted to earth activates an alarm.
A battery,12 Volt, runs the system. So would need a charger.
The questions in this are.
1. Is this an accurate assumption of how an electric fence energiser works.
2. Does anyone have a circuit diagram or circuit diagrams of either a completed electric fence energiser or the individual circuits that could be used to make up an electric fence energiser.
Many thanks
Rodney
If my understanding is correct a energiser consists of an oscillator which induces a high voltage, with very little current in an HT transformer. This is then pulsed down the fence.
The system is a closed loop which if cut activates an alarm, or if shorted to earth activates an alarm.
A battery,12 Volt, runs the system. So would need a charger.
The questions in this are.
1. Is this an accurate assumption of how an electric fence energiser works.
2. Does anyone have a circuit diagram or circuit diagrams of either a completed electric fence energiser or the individual circuits that could be used to make up an electric fence energiser.
Many thanks
Rodney
