ECU(car) chip tuning

Discussion in 'The Projects Forum' started by donovan2123, Aug 5, 2009.

  1. donovan2123

    Thread Starter New Member

    Aug 5, 2009
    3
    0
    Hi not sure if this is correct section but here goes. Im looking for a chip programer which will read the below chips:

    plcc44 1024
    plcc32 020
    plcc32 040
    plcc32 080
    dip28 256
    dip28 512
    dip28 87c257
    dip24 c64
    sop44 800
    sop44 400
    sop44 200

    It also needs to be able to support PSOP44, PLCC32, PLCC44 adaptors.

    I was looking at this programmer but im not sure if its good:
    http://www.progshop.com/shop/programmer/BX32P/index.html
    hence me on here:
     
  2. jj_alukkas

    Well-Known Member

    Jan 8, 2009
    751
    5
    Actually what you seem to have specified are only the socket types. Every uC appears in different packages, almost in all types you specified. So if you wanna program a specific chip, you will have to look for its family and no. There are adaptors for almost all chips, be it PLCC or DIP for normal programming..
     
  3. donovan2123

    Thread Starter New Member

    Aug 5, 2009
    3
    0
    look at some of the chips i need to read example plcc44 im guessing i need a 40dip adaptor which the above programmer wont work with. so looks like it will be batronix bagero bx40
     
    Last edited: Aug 5, 2009
  4. jj_alukkas

    Well-Known Member

    Jan 8, 2009
    751
    5
    ANY programmer you buy needs adapter for non-DIP sockets. Only there are rare cases.
     
  5. donovan2123

    Thread Starter New Member

    Aug 5, 2009
    3
    0
Loading...