Hello. I am working on making a low pass filter (the diagram is showing it). Just to make sure everything is clear, I have a 5.1 audio receiver, and each channel has 100W output. I want to hook up a couple of LED strips in parallel (maybe 5). I just want to make sure this is all correct and alright! Thanks!
http://forum.allaboutcircuits.com/attachment.php?attachmentid=45387&stc=1&d=1345003019

 

This looks wrong to me. 12 volts at 100 watts doesn't make sense. 12 volts through a 1 k resistor will allow .012 amps...enough to run 1 LED...not 5 strips of them.

Need a bigger picture.

 

Ok, i see what you mean. I'll work on it more tomorrow and check back with my revised diagram tomorrow. thanks