Do I need a shift register? Counter+Decoder? Need your advice

Discussion in 'The Projects Forum' started by hyuuga_patik, Mar 7, 2009.

  1. hyuuga_patik

    Thread Starter New Member

    Mar 7, 2009
    2
    0
    Good Day!

    I have a problem on what circuit I need to use for this timing diagram (attached file). I have read from some paper which uses a counter + decoder. Can I use a shift register? Or any other circuits you can suggest?

    Thank you so much!

    patik
     
  2. beenthere

    Retired Moderator

    Apr 20, 2004
    15,815
    282
    It might be interesting to have some idea of what the various signals were. I would guess a counter, though.
     
  3. hyuuga_patik

    Thread Starter New Member

    Mar 7, 2009
    2
    0
    hi beenthere,

    these signals are inputs to my cds circuit (CIS). but i need to generate these signals using 1 external clock signal of 6MHz.. i tried using counter then decoder. but i haven't tried using a shift register yet. i was kinda hoping there is a much simpler circuit structure :D

    thanks!
     
Loading...