DIY RS232 ISP Atmel Programmer .

Discussion in 'Embedded Systems and Microcontrollers' started by hilogicsys, Nov 18, 2007.

  1. hilogicsys

    hilogicsys Thread Starter New Member

    Joined:
    Nov 18, 2007
    2
    0
    #1
  2. hgmjr

    hgmjr Moderator

    Joined:
    Jan 28, 2005
    9,030
    210
    That looks like a nice tool for those of our members interested in developing code and hardware on the AT89S AVR series it supports.

    Have you built this item yourself? If so can you describe your experience for the benefit of our other members who may be interested in tackling something similar?

    Thanks,
    hgmjr
     
    #2
  3. hilogicsys

    hilogicsys Thread Starter New Member

    Joined:
    Nov 18, 2007
    2
    0
    Hi,
    I have personaly Built this Programmer, and it really works very well and simple to build. It also works with any USB to RS232 converter, But if you want to build it you would need a conventional Programmer to Program the AT89C2051 (Once).
     
    #3
  4. Tianjiwubian

    Tianjiwubian New Member

    Joined:
    Aug 16, 2008
    1
    0
    Thanks for your share!
    Did you develop the programmer software with VB??
    Besides , can you share more detailed information for it---the code of firmware and Programmer? Thanks again!
    <SNIP>
     
    Lasted edited by : Sep 9, 2012
    #4
  5. Arm_n_Legs

    Arm_n_Legs Active Member

    Joined:
    Mar 7, 2007
    183
    10
    Very interesting circuit. Will try it out.

    Atmel has also some 8051s which can be directly programmed through the PC USB port without any programmer circuit. Check out Atmel AT89C5131.

    The attached circuit shows the simplicity of the circuit using AT89C5131. Program downloading using a USB cable.

    :)
     
    • temp.jpg
      temp.jpg
      File size:
      22.2 KB
      Views:
      132
    #5
  6. shannan

    shannan New Member

    Joined:
    Feb 4, 2009
    9
    0
    Please help, Anyone knows where to get the programmer to program Atmel chips, model number is ET51 (from china or taiwan made)?
    http://www.addour.cn/bbs/viewthread.php?tid=90
    Or any other similar programmer as ET51 can be purchased in singapore or malaysia?
     
    #6
  7. shannan

    shannan New Member

    Joined:
    Feb 4, 2009
    9
    0
    Thank you for all the responses. Sorry I should have said it earlier, i am sourcing for my friend. He needs this for his automachine and he doesn't have the time to do it.

    Can i know where can i purchased Atmel ET51, AT89C5131 or any other similar programmer? Or can anyone built it and sell it to me?

    You can contact me at <SNIP>
     
    Lasted edited by : Sep 9, 2012
    #7
  8. shannan

    shannan New Member

    Joined:
    Feb 4, 2009
    9
    0
    Looking for People to DIY Atmel Programmer, please email me at <SNIP> for charges. thank u
     
    Lasted edited by : Sep 9, 2012
    #8
  9. Arm_n_Legs

    Arm_n_Legs Active Member

    Joined:
    Mar 7, 2007
    183
    10
    You can buy them from http://www.mouser.com.

    AT89C5131 is not a programmer. It is a 8051-based microcontroller which does not need a hardware programmer to burn the code. Just connect the USB port of the chip to the PC USB port and run the free programmer software (ATMEL FLIP).
     
    #9
  10. kusuma5

    kusuma5 New Member

    Joined:
    Jul 5, 2009
    3
    0
    Sir i rigged up this circuit. It is giving communication failure: reception error, then it is displaying No supported programmer detected. what may be the problem sir ? Please help.
     
    #10
  11. kusuma5

    kusuma5 New Member

    Joined:
    Jul 5, 2009
    3
    0
    sir i rigged up your circuit given in http://www.8052.com/users/AT89S52InSystemProg/ . The flash is burning for both AT89S51 and AT89S52. But the test program is not running. however the test program is running only once for a new AT89S51 only. Again if i burn the flash on same AT89S51 the test program is not working. Please help me sir.
     
    #11
  12. adventtech

    adventtech Member

    Joined:
    Feb 10, 2009
    22
    0
    #12
  13. adventtech

    adventtech Member

    Joined:
    Feb 10, 2009
    22
    0
    Does the programmer programs and then verifies the flash image without any errors? What is the test program/firmware and is it possible that the circuit where u r testing ur firmware has some issues?
     
    #13
  14. GetDeviceInfo

    GetDeviceInfo Senior Member

    Joined:
    Jun 7, 2009
    1,510
    207
    did you alter the lock bits?
     
    #14
  15. coolamigo

    coolamigo New Member

    Joined:
    Jun 9, 2012
    3
    0
    I was wondering if someone could mention some more of such Atmels (and preferably PICs aswell) that do not need a burner.

    I am very new to μCs and it would be a great help if I could try my code without requiring an expensive burner

     
    #15
  16. kubeek

    kubeek AAC Fanatic!

    Joined:
    Sep 20, 2005
    4,009
    595
    #16
  17. t06afre

    t06afre AAC Fanatic!

    Joined:
    May 11, 2009
    5,939
    1,222
    How much would you say an expensive burner is? And You also have the Arduino. That have a fair price. The cheapest one is this http://www.ti.com/tool/msp-exp430g2 $4.30
     
    #17
  18. Arm_n_Legs

    Arm_n_Legs Active Member

    Joined:
    Mar 7, 2007
    183
    10
    Even cheaper than the Atmel 89C5131 is the NXP 89LPC922. Both are 8051 derivatives. You do not need a programmer to burn the codes for the 89LPC922. A serial cable and a download software called the Flashmagic will do.
     
    #18
    coolamigo likes this.
  19. coolamigo

    coolamigo New Member

    Joined:
    Jun 9, 2012
    3
    0
    Hey I am talking about one that can do both Atmel and PIC at a time (like universal).


    Thanks dear, I shall look into this IC.
     
    #19
Loading...