Designing an asynchronous counter

Discussion in 'Homework Help' started by nyasha, Dec 15, 2009.

  1. nyasha

    Thread Starter Active Member

    Mar 23, 2009
    I would to know do l make all flip flops clear when the counter reaches five or immediately after it reaches 6 ?
  2. beenthere

    Retired Moderator

    Apr 20, 2004
    How about some way to issue a reset signal when the count = 5 and there is a clock?
  3. sgardner025

    Active Member

    Nov 5, 2009
    You could try decoding the binary 5 or 6 and then send a low or high signal to the clear inputs, depending whether they are active high or low. I just finished a school project of building a basketball scoreboard with clock and everything else associated and there were some JK's involved. The decoding worked great as a PS signal.