Designing a pi section CLC filter,RC filter

Discussion in 'Homework Help' started by baffleddreams, Feb 8, 2011.

  1. baffleddreams

    Thread Starter New Member

    Jan 31, 2011
    designing a filter-pi and RC
    I am new to electronics(first year student),and have this assignment to do.I dont know how to start with please help.Thanks.

    I want to Design a ∏-section CLC filter whose ripple factor is 0.105.The dc output voltage is to be 9.3V,a load current of 40 mA. I am to Redesign the same as an RC filter to maintain the same ripple,the rectifier should be a bridge type.

    This is what I have done so far


    and Xc=1/2ωC
    for a frequency=50Hz

    Now what I'll have to do is that I'll have to select the capacitor and inductor values....Somebody please help.....
    Last edited: Feb 8, 2011