Design Problem- emitter/amp

Discussion in 'Homework Help' started by lsecrease, Oct 13, 2008.

  1. lsecrease

    Thread Starter New Member

    Sep 4, 2008
    6
    0
    I'm not too good @ designing this complicated material. Please help in any way possible:

    Design a tuned common emitter-amplifier stage to operate at 100kHz. Use a bypassed emitter resistor and set the quiescent current at 1.0 mA. Assume Vcc= +15V and L=1mH and put a 6.2 K resistor across the LC to set Q = 10.Use capacitive input coupling.
     
  2. beenthere

    Retired Moderator

    Apr 20, 2004
    15,815
    282
Loading...