DC - DC LVDT voltage comparison

Discussion in 'General Electronics Chat' started by kdoney, Feb 26, 2004.

  1. kdoney

    Thread Starter New Member

    Feb 26, 2004
    1
    0
    I need to deliver a logic signal based upon the comparison of two dc
    voltages coming from a DC - DC LVDT (sheet
    http://www.sensotec.com/pdf/ms3s3c.pdf ) . These inputs will be in the range
    of +- 5V and are temperature stabilized and filtered. Since the discrete
    movements being measured are ~ .00015", the device will have to be very
    precise. Any suggestions would be appreciated.
     
Loading...