Creative Inspire T3030

Discussion in 'General Electronics Chat' started by sten86, Jul 27, 2010.

  1. sten86

    Thread Starter New Member

    Jul 26, 2010
    4
    0
    Hello! Help to repair Creative Inspire T3030. The remote control socket has been earlier removed, and wires are soldered directly. Then they have come off, and there is no possibility to learn what where went. As has burnt down resistor R, and it is impossible to learn its face value. Who can help.
    [​IMG]
     
  2. beenthere

    Retired Moderator

    Apr 20, 2004
    15,815
    282
    That pic is too blurry to make out. Have you tried the manufacturer for a wiring diagram?
     
  3. sten86

    Thread Starter New Member

    Jul 26, 2010
    4
    0
    Last edited: Jul 28, 2010
  4. gopalyajur

    Active Member

    Jan 3, 2010
    93
    12
    Hello Sten,

    Following are the pin connections

    Pin1- Brown
    Pin2- Green
    Pin3- Yellow
    Pin4- White
    Pin5- Violet
    Pin6- Blue
    Pin7- dummy / not connected
    Pin8- Black
    Pin9- Red/violet

    Please note that, I checked the continuity to pin connection when the switch was closed (ON).

    And the value for the resistor (R25) is 5.6 Ω.

    Hope it helps.:)


    Gopal
     
    sten86 likes this.
  5. sten86

    Thread Starter New Member

    Jul 26, 2010
    4
    0
    Thanks, has repaired :)
     
Loading...