Creative I-Trigue 3300 Male Pin out

Discussion in 'General Electronics Chat' started by silverfox15987, Sep 9, 2013.

  1. silverfox15987

    Thread Starter New Member

    Sep 9, 2013
    2
    0
    OK so I have been scouring forums, websites, and images, and can't find any 'reliable' Pin outs for my Creative I-trigue 3300. I know the speaker system is old but I can't find anything that's within my price range that puts out the same quality these did. My volume control pod Male connector completely separated from the Brass ring and pins. And to boot it all When trying to remove the glue from the pin out I ended up damaging the wires too much to be able to see what goes where.

    Does anyone have any idea where they go?

    Also where can I purchase JUST a 9 pin din Male Connector? Vetco has one for a dollar but wants 7 dollars for shipping... (Which is ridiculous in my opinion when it's small enough you can put in an envelope and male it LOL Not the safest way of shipping but still.)
     
  2. apprenticemart2

    Member

    May 7, 2013
    67
    7
    I'm not saying that I or anyone can help, but a picture speaks a thousand words.(unless of course you don't have a real camera to take a real picture with. It amazes me that the instagram culture exists, Monet has a higher pixel count)
     
  3. silverfox15987

    Thread Starter New Member

    Sep 9, 2013
    2
    0
    Well, the only thing I can get any kind of picture of is the speakers themselves.

    http://images10.newegg.com/NeweggImage/ProductImageCompressAll300/36-116-120-01.jpg

    This is what I own.

    The Volume Control (Which has a 9 pin mini din that plugs into the back of the subwoofer. {Which is what I need the pin out for}

    I can NOT find a picture of the 9 pin Mini din for the life of me, nor do I own one to upload a picture.
     
Loading...