convert spice netlist to CIRCUIT

Discussion in 'General Electronics Chat' started by dileepchacko, Jan 29, 2009.

  1. dileepchacko

    Thread Starter Active Member

    May 13, 2008
    102
    1
    Dear All

    How to convert SPICE net list to equivalent circuit diagram.

    SPICE NET LIST

    OP_HW_RECTIFIER.CIR - OPAMP HALF-WAVE RECTIFIER
    *
    VS 1 0 SIN(0V 1VPEAK 1KHZ)
    *
    * HALFWAVE RECTIFIER
    R1 1 2 10K
    R2 2 3 10K
    XOP1 0 2 4 OPAMP1
    D1 4 3 D1N4148
    D2 2 4 D1N4148
    *
    RL 3 0 100K
    *
    *
    * SIMPLE DIODE RECTIFIER
    D3 1 5 D1N4148
    RL2 5 0 100K
    *
    * DIODE
    .model D1N4148 D(Is=0.1p Rs=16 CJO=2p Tt=12n Bv=100 Ibv=0.1p)
    *
    *
    * OPAMP MACRO MODEL, SINGLE-POLE
    * connections: non-inverting input
    * | inverting input
    * | | output
    * | | |
    .SUBCKT OPAMP1 1 2 6
    * INPUT IMPEDANCE
    RIN 1 2 10MEG
    * DCGAIN =100K AND POLE1=1/(2*PI*RP1*CP1)=100HZ
    * GBP = DCGAIN X POLE1 = 10MHZ
    EGAIN 3 0 1 2 100K
    RP1 3 4 1000
    CP1 4 0 1.5915UF
    * OUTPUT BUFFER AND RESISTANCE
    EBUFFER 5 0 4 0 1
    ROUT 5 6 10
    .ENDS
    *
    *
    * ANALYSIS
    .TRAN 5US 2000US 0US 5US
    *.TRAN 0.1US 20US 0US 0.1US
    *
    * VIEW RESULTS
    *.PRINT TRAN V(1) V(3)
    .PROBE
    .END
     
Loading...