Connector ID Reward!!!!

Discussion in 'General Electronics Chat' started by RMassa187, May 7, 2011.

  1. RMassa187

    Thread Starter New Member

    May 7, 2011
    1
    0
    Need help identifying the connector that fits this or a lead to the manufacturer. In the first picture the number on the side is 8113. The other numbers are 100916-2, 11936-C (I think its a hex color code) and 120 deg (spread pattern maybe). It is an LED light that illuminates the door panel pocket on a Chrysler 300. First person that gives me info to find this connector will get $10 in their Payapl account. Need this info yesterday. Thanks for any help

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
  2. marshallf3

    Well-Known Member

    Jul 26, 2010
    2,358
    201
    Any Chrysler dealer should be able to look it up in their fiche and supply either end.
     
  3. Kermit2

    AAC Fanatic!

    Feb 5, 2010
    3,779
    932
    Get some commercially available connector(male and female) and use them. Trim the plastic back some from the pins and solder wires directly on to them. OR contact the Chrysler dealer as said before.

    It is a PROPRIETARY plug fixture and will NOT be found in any commercial catalog from electronics dealers. ONLY chrysler will be able to source it.
     
Loading...