component selection

Discussion in 'Electronics Resources' started by psr, Sep 23, 2010.

  1. psr

    Thread Starter New Member

    May 15, 2008
    4
    0
    Hello Guys,

    I am new to Hardware testing. I need to select few loads with respect to the driver output rating. Can anyone Please help me in selecting the loads.

    Driver rating
    Imax- 1A
    overload- <5A
    Miimum rise and fall time 10 us.

    Load types can be

    - Capacitive, max 10µF, (e.g. LED matrix)
    - Inductive loads with EAS up to 65mJ.

    I am searching for LED matrix but unable to find. Please help.

    Thanks in advance.
     
  2. Kermit2

    AAC Fanatic!

    Feb 5, 2010
    3,795
    951
    Without knowing the type of voltage- AC or DC, and without knowing the amplitude of the output- 5 volt or 120 volt, there is very little we could help you with.

    Details details and more details. That's the way to get answers here.
     
  3. psr

    Thread Starter New Member

    May 15, 2008
    4
    0
    Sorry for less data.
    It is Battery voltage of 24 Volts.
    I am searching for LED matrix with current consumption near to 1A or
    please suggest any relay that can be used here as load.
    Thanks in advance.
     
Loading...