common emitter transistor configuration

Discussion in 'General Electronics Chat' started by amaresh92, Nov 8, 2010.

  1. amaresh92

    Thread Starter New Member

    Oct 31, 2010
    23
    0
  2. Audioguru

    New Member

    Dec 20, 2007
    9,411
    896
    Why don't you save the schematic by pressing the Print Scrn key then post it here?

    The emitter is not grounded, the emitter resistor and biasing resistors are grounded.
    The capacitor bypasses the emitter resistor so the transistor has a high voltage gain for the AC signal.
     
    amaresh92 likes this.
Loading...