Comments on Breakout board for STM32

Discussion in 'Embedded Systems and Microcontrollers' started by Vindhyachal Takniki, Apr 23, 2016.

  1. Vindhyachal Takniki

    Thread Starter Member

    Nov 3, 2014
    349
    6
    I have made a schematic of breakout board for STM32F205RBT6.
    I will make a square board with all pins from MCU coming out to outer 2.5mm headers.

    1. Symbols in schemtaic with name "Nx", are bascially are small jumpers with 0805 size.

    2. I have some odd debug connector here. I have made this kind of connection for other boards so that's not a problem.

    Any comments/suggestions on ckt.
     
Loading...