Choosing a frequency

Discussion in 'Wireless & RF Design' started by HarG, Jun 18, 2013.

  1. HarG

    Thread Starter New Member

    Nov 20, 2012
    18
    0
    Hi Guys,

    Is there anywhere you recommend that shows guidance on what frequencies/technologies are best suited to applications. I.e for a wireless mesh with a relatively small data requirement. I.e why 868MHz or 2.4GHz etc?

    Any help would be appreciated.
     
  2. vk6zgo

    Active Member

    Jul 21, 2012
    677
    85
    It is not just a question of which is most suitable on an Engineering basis.

    The Radio spectrum is a regulated asset under International Treaty,so that some services are allocated particular frequency bands by law,& the protocols of that type of service are affected by that allocation.
     
  3. circuitfella11

    Member

    May 10, 2013
    56
    5
    you can find some frequency band that are not in use, but of course you can find those after talking it out with communications commissions in your country..as vk6zgo said, these are governed by laws and protocols..
     
  4. bertus

    Administrator

    Apr 5, 2008
    15,648
    2,347
Loading...