building a Viberator, in place of a speaker, for hearing impaired .

Discussion in 'General Electronics Chat' started by Grubstake, Sep 4, 2010.

  1. Grubstake

    Thread Starter New Member

    Sep 4, 2010
    2
    0
    I want to make a viberator for a friend that likes to metal detect, but can't hear good. I have a vibrator motor,9VDC, the problem is the out put on the headphone jack on the detector, only puts pout less than one volt, about 1.5 ma. Is there a micro switch, I could get that would ativate the 9 volt motor as long as I put a batter on it, that would work in place of the speaker or headphones? Grubstake
     
  2. bertus

    Administrator

    Apr 5, 2008
    15,648
    2,347
    Hello,

    I made a sound to light some time ago with (our member) fenris.

    [​IMG]


    The lamp can be replaced by the vibration motor.
    Bertus
     
    Last edited: Sep 4, 2010
  3. Grubstake

    Thread Starter New Member

    Sep 4, 2010
    2
    0
    Thanks bertus, look like what I was looking for. I'll try it out. Grubstake
     
Loading...