Basic Simulink Model of induction Generator

Discussion in 'The Projects Forum' started by theebu29, Dec 14, 2011.

  1. theebu29

    Thread Starter New Member

    Sep 27, 2011
    2
    0
    Hello Friends,

    This is Deeban from germany . As a part of my project i need to build up a basic asynch genrator model . I already saw a self -excited induction generator model and m not sure of it. If someone already has the model or someoneis very good at it can you please send de mdl file to <SNIP>
    These are are parameters included in the model .And i Am supposed to model two generators one is fixed speed and the other is variable speed . Thank u ..
    number of generators (max 2),
    Pref (kW), RPMsync, slip (%), tangentslip, tau (s), main generator
    P_loss_el (kW) at 0%, 50%, 100% Pref, main generator
    P_loss_mech (kW) at 0%, 50%, 100% Pref, main generator
    TauSwitch ( Time constant for switching operation between generators)
    Pref (kW), RPMsync, slip (%), tangentslip, tau (s), second generator
    P_loss_el (kW) at 0%, 50%, 100% Pref, second generator
    P_loss_mech (kW) at 0%, 50%, 100% Pref, second generator
    P_loss_mech Nref (mech. loss (kW) at RPM, gen. off), second generator
     
    Last edited by a moderator: Dec 14, 2011
  2. SgtWookie

    Expert

    Jul 17, 2007
    22,182
    1,728
    Hello Deeban,
    Welcome to the Forums!
    It is not good to post your E-mail address, as "spam bots" will find it and fill your E-mail inbox with garbage spam.

    Try a search on Google for:
    induction generator model +simulink
    and you will get over 300,000 results to look at.

    As far as this forum is concerned; we communicate help in threads, not via E-mail nor PM. Helping via PM and E-mail defeats the purpose of the Forum, jams up peoples' E-mail and PM's, and would wind up being disorganized and confused. Having all of your replies in one thread/topic helps a great deal in keeping things progressing towards a logical direction/conclusion, and helps other people who may have a very similar question.
     
    theebu29 likes this.
  3. theebu29

    Thread Starter New Member

    Sep 27, 2011
    2
    0
    thanks a lot as i was new i dint know !! will follow ur instructions thank u !
     
Loading...