Automatic switch over with dpdt or spdt

Discussion in 'The Projects Forum' started by Jera2207, Jun 19, 2016.

  1. Jera2207

    Thread Starter New Member

    Jun 19, 2016
    2
    0
    Hi Team,

    My current project is installing a sterling 120amp splitr to split charge between bank 1 in vehicle and bank 2 in camper. When the camper is disconnected the the splitr shuts down as it need both banks to operate. My question is how do I wire an automatic switch over so when I unplug the camper it automatically switches/bridges both splitr outlets to bank one and tricks into thinking it has two banks connected and does the reverse when connected again.

    Cheers

    Jeremiah
     
  2. BobaMosfet

    Active Member

    Jul 1, 2009
    109
    11
    You might try just connecting a 12V battery in parallel with your camper. Then it always sees a battery attached, only the capacity changes.
     
  3. Jera2207

    Thread Starter New Member

    Jun 19, 2016
    2
    0
    Thanks, that's definitely an option. I would prefer to exhaust this avenue first.

    Cheers
     
Loading...