Audio Spectrum Analyzer. - Looking For Suggestions!

Discussion in 'The Projects Forum' started by erezMASTER, Jan 12, 2012.

  1. erezMASTER

    Thread Starter New Member

    Jan 11, 2012
    25
    0
    Hi guys, :)
    I am working on an Audio Spectrum Analyzer based on leds,
    and i just cant think of something effective to add for it.

    I mean, I will make the graphic change the display style (rising dots, bars..)
    with a "number board" attached.
    But I have no other cool ideas that i can add to the Project.

    Can you give me an advice about some effective/cool stuff I can add?

    Thanks a buch,
    Erez. :)
     
  2. wayneh

    Expert

    Sep 9, 2010
    12,090
    3,027
    Form follows function. If it's doing what you want, I suggest working on making it as small, clean, sturdy, beautiful, as possible.
     
  3. kbyrne

    Member

    Dec 10, 2011
    84
    2
    On a Cadsoft Site there is a Projects section and free downloads. If you have to download Eagle freeware latest version and open project folder. Download a Audio Logic
    Analizer project found in project area. Un zip with 7 zip after you place it on your desktop.
    Then drag and drop into open folder. View entire project includeing extensive PDF. Only frality One transistor number was missing. Complimentary pair number works. Beautiful project thou. Enjoy
     
  4. erezMASTER

    Thread Starter New Member

    Jan 11, 2012
    25
    0
    Wayneh, I am doing it as as a Degree project,
    so I want it will include as much functionality as it deserves.

    Thanks guys!

    More suggestions will be more than welcome!
     
  5. jimkeith

    Active Member

    Oct 26, 2011
    539
    99
    Add VU meter function
     
  6. erezMASTER

    Thread Starter New Member

    Jan 11, 2012
    25
    0
    Thanks,
    I though about adding speakers,
    and controlling thier output frequencies with digital resistors so the "Analyzer" will respond identically and this will make the leds display more prettier and functional..

    This method seems too complicated with a microcontroller,
    someone knows a better and a more simple idea achieving such a goal?

    Thanks,
    Help will be much appriciated! :)
     
Loading...