Hi I would like to make a power supply for an Atwater Kent model 10. I know it needs 90v dc and two or three other voltages if anyone has any experience with these would you please help this radio means more than its value.

 

Here's the schematic. Please forgive the rotation. I don't know how to manipulate .pdf's
Pretty difficult to read.
A bunch of CX301A tubes. Filaments 5V 1/4A
and here's the vacuum tube specs:
No, I don't have any experience with these, but I'm curious enough to look up the references.

 

If you haven't found this http://glass-ware.stores.yahoo.net/vore.html site, it's very worthwhile. The earlier link would be
http://www.tubecad.com/

 

Hello,

I could find the 10A, but not the 10 on this site:
http://www.atwaterkent.info/
The schematic of the 10A is here:
http://www.atwaterkent.info/TechData/Drawings/Images/AK04550sch.pdf
I do not know the differences.

Bertus